5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Nitto Ridge Grappler 35x11.50x20 fit on Stock 20” wheels?

Ram1992

Active Member
Joined
Dec 15, 2019
Messages
177
Reaction score
41
Location
Houston TX
Good evening ,

I need help . I am going to purchase the ridge grapplers tires tomorrow but I need confirmation they will fit on a stock 20”bighorn wheel without rubbing.I have an appointment on Monday to get a 2” level kit installed but I want to have the tires installed prior to the level kit install . I’ve searched the forum but can’t seem to find the answer.
appreciate y’all’s time.
 

fer1023

Member
Joined
Jan 12, 2020
Messages
20
Reaction score
17
Installing the bilstein 5100 along with the mopar UCA(within the next few weeks)
No ORP
Read so much on here I have confused myself
About to order wheels and tires
Prob going 20x10 with -18 offset
Anybody know if the 285/65/20 will fit without rubbing?
 

Ram1992

Active Member
Joined
Dec 15, 2019
Messages
177
Reaction score
41
Location
Houston TX
Installing the bilstein 5100 along with the mopar UCA(within the next few weeks)
No ORP
Read so much on here I have confused myself
About to order wheels and tires
Prob going 20x10 with -18 offset
Anybody know if the 285/65/20 will fit without rubbing?

I also did the same. Read and read, changed my mind a bunch of time till I just went and got my tires installed. I had a bit of rubbing at full turn but since I got my leveling kit installed I don’t rub any more. I’m running stock 20” wheels.
 

Grey03svt

Active Member
Joined
Sep 5, 2019
Messages
38
Reaction score
16
Will the 12.5 nittos for the stock wheel without rubbing? With a 3.5" Ready lift as well. Or should stick with the 11.5s
 

Ram1992

Active Member
Joined
Dec 15, 2019
Messages
177
Reaction score
41
Location
Houston TX
Will the 12.5 nittos for the stock wheel without rubbing? With a 3.5" Ready lift as well. Or should stick with the 11.5s

Im not sure if you can fit a 12.5 wide tire without rubbing. I attached a picture of the control arm and side of tire on 11.5.
 

Attachments

  • 46600C40-0736-487C-9A1D-0FC39E6720D0.jpeg
    46600C40-0736-487C-9A1D-0FC39E6720D0.jpeg
    132 KB · Views: 277

Grey03svt

Active Member
Joined
Sep 5, 2019
Messages
38
Reaction score
16
Im not sure if you can fit a 12.5 wide tire without rubbing. I attached a picture of the control arm and side of tire on 11.5.
Wow thats pretty close lol. 11.5 it is! Thanks for the pic!
 

Ramsgate

New Member
Joined
Jan 23, 2020
Messages
2
Reaction score
6
Good evening ,

I need help . I am going to purchase the ridge grapplers tires tomorrow but I need confirmation they will fit on a stock 20”bighorn wheel without rubbing.I have an appointment on Monday to get a 2” level kit installed but I want to have the tires installed prior to the level kit install . I’ve searched the forum but can’t seem to find the answer.
appreciate y’all’s time.

Just got mine done. On very sharp turns I can notice a slight rub that'll go away after a few hundred miles of wear on the tires. Overall I'm pleased with how everything turned out. The other size tire I was looking a is 295/55r20, but it's an inch shorter so I opted for the 60's so the tire size is basically a 34"tall x 11.5"wide.
2019 Ram Laramie 1500 4WD
20x10 Fuel Vandals -18 offset
Nitto Ridge Grapplers (295/60r20)
2" Rough Country Front Level Kit
Rough Country HD2 nerf bars
 

Attachments

  • B4046139-E086-49D1-B148-B1776D9B3EDA.jpeg
    B4046139-E086-49D1-B148-B1776D9B3EDA.jpeg
    170.4 KB · Views: 450
  • 7C0B6295-883C-4CC8-B6FB-164EA56443A4.jpeg
    7C0B6295-883C-4CC8-B6FB-164EA56443A4.jpeg
    152.6 KB · Views: 436
  • 608D50CE-C5DF-4839-8F26-2449A53739CA.jpeg
    608D50CE-C5DF-4839-8F26-2449A53739CA.jpeg
    190.9 KB · Views: 392
  • 02E756A6-0849-4435-A049-998F1449C2B3.jpeg
    02E756A6-0849-4435-A049-998F1449C2B3.jpeg
    186.3 KB · Views: 384

Ram1992

Active Member
Joined
Dec 15, 2019
Messages
177
Reaction score
41
Location
Houston TX
Just got mine done. On very sharp turns I can notice a slight rub that'll go away after a few hundred miles of wear on the tires. Overall I'm pleased with how everything turned out. The other size tire I was looking a is 295/55r20, but it's an inch shorter so I opted for the 60's so the tire size is basically a 34"tall x 11.5"wide.
2019 Ram Laramie 1500 4WD
20x10 Fuel Vandals -18 offset
Nitto Ridge Grapplers (295/60r20)
2" Rough Country Front Level Kit
Rough Country HD2 nerf bars


Looks good! What leveling kit is it? Preload spacer or top hat spacer?
 

Venom

Active Member
Joined
Dec 1, 2019
Messages
30
Reaction score
14
Im not sure if you can fit a 12.5 wide tire without rubbing. I attached a picture of the control arm and side of tire on 11.5.
[/QUOTE
Will a spacer work with this set up stock 20in wheels with the 35x11.5 with level kit?
 

NJC1684

Well-Known Member
Joined
Apr 13, 2019
Messages
243
Reaction score
88
Location
North Dakota
Just got mine done. On very sharp turns I can notice a slight rub that'll go away after a few hundred miles of wear on the tires. Overall I'm pleased with how everything turned out. The other size tire I was looking a is 295/55r20, but it's an inch shorter so I opted for the 60's so the tire size is basically a 34"tall x 11.5"wide.
2019 Ram Laramie 1500 4WD
20x10 Fuel Vandals -18 offset
Nitto Ridge Grapplers (295/60r20)
2" Rough Country Front Level Kit
Rough Country HD2 nerf bars

Nice stance! How far outside the flare is your setup?
 

Gman1johnson

New Member
Joined
Apr 30, 2020
Messages
1
Reaction score
0
Just got mine done. On very sharp turns I can notice a slight rub that'll go away after a few hundred miles of wear on the tires. Overall I'm pleased with how everything turned out. The other size tire I was looking a is 295/55r20, but it's an inch shorter so I opted for the 60's so the tire size is basically a 34"tall x 11.5"wide.
2019 Ram Laramie 1500 4WD
20x10 Fuel Vandals -18 offset
Nitto Ridge Grapplers (295/60r20)
2" Rough Country Front Level Kit
Rough Country HD2 nerf bars
I’m looking to go with a very similar setup you have. About how much tire do you have sticking out of the fenders?
 

Chuck19

Well-Known Member
Joined
Mar 18, 2020
Messages
463
Reaction score
340
Location
Southwest Florida
Just got mine done. On very sharp turns I can notice a slight rub that'll go away after a few hundred miles of wear on the tires. Overall I'm pleased with how everything turned out. The other size tire I was looking a is 295/55r20, but it's an inch shorter so I opted for the 60's so the tire size is basically a 34"tall x 11.5"wide.
2019 Ram Laramie 1500 4WD
20x10 Fuel Vandals -18 offset
Nitto Ridge Grapplers (295/60r20)
2" Rough Country Front Level Kit
Rough Country HD2 nerf bars
Very nice setup! wish I could get those running boards for the quad cab
 

Bigdaveincali

Active Member
Joined
May 16, 2020
Messages
75
Reaction score
28
Location
SoCal
Just got mine done. On very sharp turns I can notice a slight rub that'll go away after a few hundred miles of wear on the tires. Overall I'm pleased with how everything turned out. The other size tire I was looking a is 295/55r20, but it's an inch shorter so I opted for the 60's so the tire size is basically a 34"tall x 11.5"wide.
2019 Ram Laramie 1500 4WD
20x10 Fuel Vandals -18 offset
Nitto Ridge Grapplers (295/60r20)
2" Rough Country Front Level Kit
Rough Country HD2 nerf bars
Those are sick
 

jkgreene85

New Member
Joined
Oct 7, 2021
Messages
1
Reaction score
0
I recently inquired about this at a local shop near me who specializes in offroad packages. At first they suggested a 4in lift with 35-12.5-20 but I went and talked to them bc I just put on some 285-60-20 Falken Wildpeaks which they are a good tire for it's purpose but not the look I was hoping for, probably should have went 305 from the beginning, lesson learned. Anyways after looking at my 2018 Ram 1500 crewcab that I have a 2in motofab leveling kit installed, he suggested the 35-11.5-20 due to the factory wheels and with 12.5 there could be rubbing. I also checked tire comparsion and vs what I currently have on there now, the 35 sits a little over an inch higher but with the 11.5 it's not as wide(to prevent rubbing I assume).

Anyways, I plan on going with the Nitto Ridge Grapplers but wanted to see if anyone else had these and how they like them? Again I have the Falken Wildpeaks on mine, to me they are good not great but that's just me lol. So will eventually go from 285-60-20 to the 35-11.5-20 and will look to sell my Wildpeaks as they only have roughly around 3k miles

Appreciate any feedback here!

Thanks!
 

Users who are viewing this thread

Top