5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

cable

bill

Active Member
Joined
Dec 29, 2018
Messages
43
Reaction score
4
Looking for info on getting the LVDS cable that goes between display and module 12.1.
 

Electrical

Ram Guru
Joined
Dec 16, 2018
Messages
755
Reaction score
462
I believe all LVDS runs on 100 Ohm differential... regardless of speed grade.

Not knowing what speed the display module uses, if you got the highest speed grade you could find, in a similar length, you should be good to go provided connector and pinout are replicated.
 

bill

Active Member
Joined
Dec 29, 2018
Messages
43
Reaction score
4
I believe all LVDS runs on 100 Ohm differential... regardless of speed grade.

Not knowing what speed the display module uses, if you got the highest speed grade you could find, in a similar length, you should be good to go provided connector and pinout are replicated.
I believe all LVDS runs on 100 Ohm differential... regardless of speed grade.

Not knowing what speed the display module uses, if you got the highest speed grade you could find, in a similar length, you should be good to go provided connector and pinout are replicated.


thank you so much.
 

Electrical

Ram Guru
Joined
Dec 16, 2018
Messages
755
Reaction score
462
Keep in mind idk anything about the OEM implementation; I'm just making general comments about LVDS cables.
 

Users who are viewing this thread

Top