20x10 - 18 Offset on 295/60-20 Ridge Grapplers

[mikejones202]

Anyone running this set up with a Motofab 2.5" Level kit? Just ordered mine today and wanted to see some pics! Should I worry about rubbing? Thanks!
2020 Ram 1500 BigHorn North Edition 4x4 Crew Cab 6.5 Bed

 

[Medman99]

Anyone running this set up with a Motofab 2.5" Level kit? Just ordered mine today and wanted to see some pics! Should I worry about rubbing? Thanks!
2020 Ram 1500 BigHorn North Edition 4x4 Crew Cab 6.5 Bed

I have the same level kit and 33 by 12.5 nittos on. No running but the truck is lower on the back end I think.

 

[Medman99]

Rubbing I mean

 

[clobato]

I will be soon. I’m hoping to get everything installed this weekend.

 

[clobato]

I just finished installing mine. It’s a 2.5” Motofab leveling kit up front, 20x10 -18mm Moto Metal Folsom wheels and 295/60r20 Nitto Ridge Grapplers. Looks like I’m going to be rubbing on the back of the front tires on the fender liner if I turn just right. I’ll need to massage the liner and it should be good.

I am going to do a 2” Motofab spacer in the back because I do tow and I think it would go nose high with the trailer.

the front is currently sitting at 40.5” fender to ground and the back is 40”.

 

[mikejones202]

I just finished installing mine. It’s a 2.5” Motofab leveling kit up front, 20x10 -18mm Moto Metal Folsom wheels and 295/60r20 Nitto Ridge Grapplers. Looks like I’m going to be rubbing on the back of the front tires on the fender liner if I turn just right. I’ll need to massage the liner and it should be good.

I am going to do a 2” Motofab spacer in the back because I do tow and I think it would go nose high with the trailer.

the front is currently sitting at 40.5” fender to ground and the back is 40”.

View attachment 69942 View attachment 69943 View attachment 69944 View attachment 69945 View attachment 69946 View attachment 69947

We will basically have the same set up...Thank you for the pictures! Just got my level kit installed on Friday, very excited for wheels and tires to come in now!

 

[clobato]

We will basically have the same set up...Thank you for the pictures! Just got my level kit installed on Friday, very excited for wheels and tires to come in now!

No problem. I’m sure you love the set up, it definitely changes the look! Word of warning though, the tires will probably rub when turning. Today was the first chance I put any real mileage on it since I got everything finished. The left front wheel rubbed pretty bad on the fender liner and the little mud flap. I temporarily zip tied the liners back to stop the rubbing. I’ll probably get a heat gun out this weekend to reform the liner and mud flap like the sticky thread shows.