5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2.5" motofab level kit, I have some questions?

RebelJ89

Member
Joined
Mar 2, 2019
Messages
9
Reaction score
0
Tried installing my motofab 2.5" today with no luck. Followed the instructions and the videos, even tho none are of a rebel, and I could not get the strut back in with the spacer on. I could get the bottom bolt in but the top wouldn't go into the bolt holes or vise versa. I'm wondering what I'm missing, and any help is appreciated. I did however swap my UCAs out while I had it all apart.
 

RebelWraith

Polymath
Joined
May 3, 2019
Messages
849
Reaction score
711
Location
Montclair, Va.
Also the 3 top hat studs are not all evenly spaced. So, they have to be oriented properly before they will go in.
 

Bubba33

Active Member
Joined
Dec 9, 2019
Messages
155
Reaction score
88
You have to stand on it to get enough room to get it in there .
 

Users who are viewing this thread

Top