I returned the 3D printed links. Mike never replied back and I couldn't get them to install by hand or with pliers. The hole just seemed too small. Watched a guy on YouTube struggle mightily as well. Anyhow, I ordered the Revel links and will post after they are installed.
Following up after a month of use.
The wrapped trim is very easy to clean with a microfiber towel or one of the alcohol-based screen cleaning clothes I keep in my center console. Still looks as good as day one.
Any tips for installing the 3D printed links. The stock links came off very easily. The fixed plastic 3D printed one are not cooperating. I even boiled them for a couple minutes.
I also messaged Mike Bit through the Shapeways site. Hopefully there is an easy solution.
I'm running 305/45R22 118S XL Terra Grappler G2s on stock air suspension with no roughness at all. They are only 47.4 lbs each and have been smooth as silk. No need for a stiff LT tire on this truck, IMHO.
I assume he just cleaned the surface before applying, following whatever procedure Avery recommends for this specific wrap. The install seemed straightforward and it worked great on textured and smooth surfaces.
The whole upper center dash assembly comes out easily. A couple screws need to be removed from the top and you carefully pull the whole thing out, slowly prying/pulling it by hand. A few quick disconnent cables on the backside and it is free. Once the whole center piece is out, you can...
Not happy with a couple interior color choices from the factory, I had the gold Laramie dash/center console trim and the gloss black 12" touchscreen bezel wrapped in matching vinyl.
Mark Wu (Wu! Wraps) in Renton, WA did the work using Avery Supreme Matte Black vinyl wrap. It took a little over...
My issue was fixed by the dealer. Highlighted in the linked thread above.
I'm confident I'm got all the ambient lighting locations working in the Laramie Crew Cab now.
Front doors: Behind the door handles, below the armrest, and in the storage compartment.
Overhead console: Single LED that...
Big thank you to James Cole! We had the exact same problem and his post (this thread), fix, and detailed explanation helped me get my truck back in 2-days. Just like James, I had a pinched wire in the left (drivers side) rear door that was to blame. All lights are functioning as expected now...
When I looked at my rear doors (Laramie Sport Crew) I found a light/lens behind the door handle, below the arm rest, and above the bottom pocket/bin. The last one looks like a full LED strip. See attached.
Note: My RAM is currently in service for these lights (and others) not functioning.