Search results

Play with the rheostats next to the light switches and see if it comes on.

I'm not saying I agree with it, but the manual says 4 psi minimum at idle. Just scroll all the way to the very bottom, page 12.

P0128 would likely be set

Do you mean the threads in the bed that hold the rail, or the threads holding the sliding cleats?

You must have missed the part about "all bathrooms." That includes the boy's bathroom. Yes, really.

What a difference between states. The California Bureau of Auto Repair clamped down on that BS a few years ago. The Auto Repair Act specifies that work orders must be itemized. So some vague "shop supplies" charge won't cut it. Shops are certainly free to charge for cable ties or bolts or even...

Will you and the kids ever be bicycling? Will your bikes fit in a 5' bed? I wanted the long bed in the event I ever want to sleep in the truck. I could with my 1988 Ranger!

If those are aftermarket LED lights, start there. Lots of people have had strange interference problems with remote start and such and traced it to cheap LED bulbs.

F60 inside. It's a 50A.

Let us know if you ever crack the formula. I haven't been able to. How does it calculate mpg and range?

If your Ram is a 4X4, you have that same kind of CV joint boot on your front axle.

Big Horn Quad Cab, 6' bed. V8 non-eTorque, 4X4 1732 lbs

Did that trailer have a 4 pin or a 7 pin hookup? I believe the trailer length and all that are triggered by the electric brake circuit. Tow/haul only adjusts transmission shifting.

How much juice are you looking for? https://5thgenrams.com/community/threads/power-in-the-bed.38369/

You'll have better luck over at Homepage - HD Rams

You got kids? Then here's what you need to buy first. Otherwise they will plug in some electronic game and hijack the truck's audio. Amazon.com

Mix up some soapy water and cover the valve stem. Also remove the valve stem cap. I got my a$$ kicked about 1986 chasing a slow leak that turned out to be a piece of plastic flash depressing the stem when the cap was tightened down. The cap is only to keep dust out, it doesn't seal airtight...

Find the part number then google it. Sometimes you can find stuff on EBay real cheap, sometimes some dealership has a good mail order section.

F54 underdash

Move the fuse for the 12V power outlet to battery, then stick a spade terminal into the now-vacant "run" space. An inline fuse and away you go. Unless you want the power port to be run-only. Then use a piggyback fuse tap directly on the fuse.