Search results

I have a Pedal Commander for almost 5 yeas and in the past year or so I have started seeing the Christmas celebration every now and again since my battery was replaced several months ago. I have tried two different batteries and still have the issue. I am now going to remove the Pedal...

So I am almost positive it was the fact that the idiots at Advanced Auto Parts smeared a bunch of the silicone grease on the poles of the battery before he connected the positive and negative. Then the didn't tighten them down enough. I ended up taking everything off and removing the silicone...

Mine has started happening when I go over a speed bump at a certain spot. Three times it has caused my truck to have the weird dash lights to come on including check engine. This has all started after I had the battery replaced.

I replaced my battery and I am still having this issue. I live in ohio and it seems to happen randomly. Sometimes it comes up fine and sometimes it doesn't. Very strange. Everything checked out good at advanced auto parts when they did a battery test.

I had the issue last week. I don't drive my truck that much since I work from home and most of my drives are short (2-5 minutes). I am wondering if I should just take it on a long drive and get it a good charge and see if it continues to happen. It will startup fine one day and not the other...

I had to replace my battery due to the strange issue where all the 4wd and traction control freaks out on start. I got a new battery and it still seems to be acting up again. My truck starts but sometimes reports a bunch of stuff isn't working. I am curious if you had this issue what model...

What model battery did you get. I had the same issue and I thought my new battery fixed the issue. It just happened again today with the new battery.

I just noticed this on my truck. When i start it up in the morning it has a loud gurgle sound almost like I have a modified muffler. It does go away after accelerating. Are you still having this issue?

This same me as well. I told my dealer the TSB and CASE#. They said they didn't experience the problem but applied the TSB and now everything is working and the sound is gone. Thanks

I contacted my dealer with the TSB and the CASE# and I will see what they say. I am definitely having the same issue with the turning.

I started experiencing this issue in the past few weeks. 2019 Limited 25K miles. I am going to have to take my truck in to have it looked at.

Yeah that sounds like a different problem than mine. I think resetting the ECU fixed my issue (No issues since) but my dealer said they wanted to replace the entire unit so it goes in tomorrow to have the entire radio/screen replaced. We will see what happens.

So nothing worked so I took it back in to the dealer and they informed me that they have been getting a ton of 12 inch screens with issues lately and Ram doesn't want to ship out the replacement screens. The service manager came out to my truck because I kept it running so they could see the...

I will try that this morning but i take my truck to the dealer at 1:15pm and I might not that much time to test it out before I have to take it in.

They replaced the backup camera and it is still happening so back to the dealer to drop it off again. I asked them to just install the latest software so we will see what they do.

Front wheel speed sensor is what the dealership is replacing. We will see if it resolves the problem This fixed it for me. Haven't had the issue since.

Not fixed. Still happening at the dealer now dropping it off. Sorry guys.

I am posting this because this fixed my issue at least for now. After the update my truck would go blank every single time I went from reverse to drive. I finally reset all my settings and cleared all the data. Then the next morning fired up the old ram and no blank screen as of today. It has...

I was on the same version and your software version might not ever get an update. There is a forum started for N0GL hardware updates. I had to take my truck into the dealer to get to 18.45 and now I'm having issues with the screen going blank. You can ask RAMCARES but they're going to tell...

I already have a video of it happening but it happens every time i go from reverse to drive. I already setup an appointment for Tuesday. I am wondering if they're going to replace the whole radio because i would rather just have an update if that fixes it. Also why didn't they just put me on...