Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hope this helps and good luck!!
Such a shame as I like it on my ‘19 Longhorn.
Didn't hear of them doing the limited's dirty like that... If you're missing them but have the rest the wiring is probably there just taped up. you'll need to get those 3 pieces that i have listed though.I understand that ‘21 Laramies seem to be missing the dash lighting… anyone know about the ‘21 Limited? My ‘21 Limited is fully loaded and I have all ambient lighting except the 3 dash lights.
Such a shame as I like it on my ‘19Appreciate the response. I may as well try to get the dealer to figure it out and fix it. Could have just been missed during the build.Didn't hear of them doing the limited's dirty like that... If you're missing them but have the rest the wiring is probably there just taped up. you'll need to get those 3 pieces that i have listed though.
I understand that ‘21 Laramies seem to be missing the dash lighting… anyone know about the ‘21 Limited? My ‘21 Limited is fully loaded and I have all ambient lighting except the 3 dash lights.
Appreciate the response. I may as well try to get the dealer to figure it out and fix it. Could have just been missed during the build.
I used this harness 68340400AD clipped the connector thats different and hard wired it to the led light under the dash above the foot pedals. The harness has four connectors three of them are the same those three are for the lights they are plug and play the fourth one will have to be cut and spliced its just two wires.. The harness will fit perfectly it locates all the lights were they should go.. I did add the second wheel headlight switch and programmed it with alphaobd as well..
I didnt realize there was a write up nice..
Ok you may need to find another connection my truck is a Lonestar level 2 so it had the ambient lights under the dash that stay on at night. I tied into them after I figured out I could change to the 2 wheel headlight switch pretty easily. I think it was 2 changes in alpha. I just searched ambient lights in alpha under the body controller and it popped up.
My harness ends were taped up in the main like the one you have pictured here. feel around inside the tape. It might actually be there. It was taped up on it tight. It didn't look like it was in there. Had to cut the tape back to get it out. (like a mummy) Not 100% sure yours will have them since your truck didn't come with the ambient lighting package. But it's worth another look.Anyone know if a truck that doesn’t have the second rotary switch even has the plugs? I looked this morning and don’t see them anywhere.
Sent from my iPhone using Tapatalk
Can you post some pics of your dash at night lit up? If you look farther up in the thread I have before and after of mine. I heard some people have to slightly open up their slits a litter more to allow the light to come through better. That might be all you need to get it where you want it.
I'll post some later. I don't think opening the slits is going to help much as you can look up and clearly see the leds are not blocked in any way but it doesn't hurt to give it a shot. I'm more disappointed in the light above the glove box more than anything as the light output is very uneven.Can you post some pics of your dash at night lit up? If you look farther up in the thread I have before and after of mine. I heard some people have to slightly open up their slits a litter more to allow the light to come through better. That might be all you need to get it where you want it.
