2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups

[BMRAMAU]

RC 3.5 Strut lift
Falken Wildpeak AT3W 295/70R18
Method NV 18X9 -12 View attachment 97350 View attachment 97351 View attachment 97352 View attachment 97353

With the -12 Methods does the tyre sit past your guard at all? Do you have any more pictures?

 

[smckelvey89]

With the -12 Methods does the tyre sit past your guard at all? Do you have any more pictures?

with the -12 the wheel and tire combo stick out about 1/4 to 1/2 inch. I'll try and get some pictures for you

 

[BMRAMAU]

with the -12 the wheel and tire combo stick out about 1/4 to 1/2 inch. I'll try and get some pictures for you

Thanks, so do you think they would sit inside the guards on a limited with their small fender flairs?

 

[HEMITKN]

Here is -2 with flares. Front and back.

 

[smckelvey89]

Thanks, so do you think they would sit inside the guards on a limited with their small fender flairs?

It's kind of hard to judge since I don't have the fender flairs. But I'd imagine that the wheels would line up flush with the fender flares.

 

[smckelvey89]

With the -12 Methods does the tyre sit past your guard at all? Do you have any more pictures?

Here’s the picture let me know if this isn’t enough

 

[arod412]

While im patiently waiting for my 2022 truck...packages continue to come in. Only a sneak peek..haha

I don't have deep pockets, so I'm only buying 2 rims at a time, then I'm hoping during the holidays, I can get some kind of tires special.

2022 Ram 1500 Big horn Back country (D status)

2016 Dodge Charger scat pack and my wife 2021 Jeep Wrangler Unlimited Sahara (2.5" rc lift with 35" duratracs)

 

[theblet]

I can’t remember if this was asked……..how does leveling the front 2 inches affect your mpg?

 

[Whoa_Ram]

I can’t remember if this was asked……..how does leveling the front 2 inches affect your mpg?

It didn’t affect mine at all. Once I get bigger tires I know it will. Not going crazy just some 275/60 or 305/55 non E rated.

 

[R.Duff]

It didn’t affect mine at all. Once I get bigger tires I know it will. Not going crazy just some 275/60 or 305/55 non E rated.

I've got 275/60/20's and didn't see a difference in mpg from the stock 22inch princess wheels combo.

 

[Fuzznutz]

Thanks, so do you think they would sit inside the guards on a limited with their small fender flairs?

Depending on tire size, but best to stick with a +1 or 0 offset to stay inside the factory flares. That still gives a nicer looking stance. I think factory wheels are around a +18-20.

Sent from my SM-A426U using Tapatalk

 

[theblet]

Cool. Thanks guys

 

[Hustleman216]

 

[jellis466]

Just got mine fixed up. READYLIFT 3.5" SST(no front preload spacer), 18x9.5 -18 black rhino arsenals, 35x12.50 Federal Xplora RT View attachment 74721

is that a shell made specifically for 5th gens or is it off a 4th gen?

 

[Bcryan]

View attachment 104571 View attachment 104572 View attachment 104573

Needs a rear leveling kit

 

[Mountain Whiskey]

2021 Bighorn. Details in the signature.

 

[Mountain Whiskey]

View attachment 104571 View attachment 104572 View attachment 104573

What happened to your tires?

 

[21RamBigHornBlk]

Just finished getting all this installed recently. RC 2" front level struts. 1.5" rear Motofab puck. 20x9 +12 offset wheels, Copper ATP2 275/65/20. Love the look, drive is firmer than stock but still nice. Recent 5 hour highway trip got 16.1 mpg.. Maybe half to 1 mpg less than stock.

 

[LennyFartwhistle]

2021 1500 Night Edition
Raceline Scout 20x10 -19 offset
Nitto Ridge Grappler 35x12.5 R20
Currently has 2.5 inch leveling kit. Waiting to have the 3.5 inch RC lift installed. Had to pull the fender liner in with some zip ties to keep it from rubbing.

 

[NewLove]

Have a 2020 Rebel with Bilstein 5100 installed at clip 5. Perfectly leveled.. Question is when I load the truck up I now get some squat in the rear which I hate. Looking into lifting the rear a bit to get rid of the squat.
Should I go with ICON 1.5 rear springs or just go with a motofab spring spacer?? Not concerned about saving money, just trying not to effect the ride comfort, and do it more the right way.
I think the ICON Springs will only give me a half inch more seeing it’s a Rebel. Is this correct? If so, I’m not sure that will be enough to get rid of the squat when loaded up.

Any help appreciated! Thanks.


Sent from my iPhone using Tapatalk