What did you do to your Ram today???

[T West]

Just upgraded the wheels on my 2019 Limited. I liked the factory 22s, but I saw the same truck pass me on the highway and I didn't like the profile. I felt like the rims/tires were skinny and made the truck luck uptight. Went with some wider ones to give it a better look.

XD847 - 22x10 +12 offest
Toyo AT II - 33 x 12.50 x 22

I wanted to go bigger, but thanks to those airbags I couldn't go too big. But these give a similar ride as the factory 22s, just a meaner look.
No rubbing except when in aero or lowest height setting, it rubs when doing a deep turn.. So either keep the truck at normal height, or have it set to auto aero at higher speeds.
Chrome delete next... eventually.

 

[RAM Patriot]

Painted a Cosplay Captain America Shield to match the color theme of the truck and mounted it to the bike rack.

The Patriot Shield has been deployed. ! !

 

[406Rebel]

how does the old shift knob remove ...

Just pop the center cap off, it’s held on by double sided tape. There are three screws under it that hold it on. AJT has an instructional video.

 

[Eltaco]

Installed King leveling kit and splash guards

BA! How does it ride?!

You’re the first King install I’ve seen.

 

[Lil Miss Always Wrong]

new license plate frame : )

 

[Le_Slacker]

how does the old shift knob remove ...

I believe it’s a stick-on

 

[PorBoy]

Just upgraded the wheels on my 2019 Limited. I liked the factory 22s, but I saw the same truck pass me on the highway and I didn't like the profile. I felt like the rims/tires were skinny and made the truck luck uptight. Went with some wider ones to give it a better look.

XD847 - 22x10 +12 offest
Toyo AT II - 33 x 12.50 x 22

I wanted to go bigger, but thanks to those airbags I couldn't go too big. But these give a similar ride as the factory 22s, just a meaner look.
No rubbing except when in aero or lowest height setting, it rubs when doing a deep turn.. So either keep the truck at normal height, or have it set to auto aero at higher speeds.
Chrome delete next... eventually.

View attachment 56825 View attachment 56826

Bravo sir, way to step it up without being stepped upon.

 

[LamboTexas]

Added a Dee Zee heavyweight bed mat on top of my spray in liner. Needed something to keep horse feed buckets from sliding around and also something easier on my knees! Perfect fit and does exactly what I needed it to do! Price of less than $90 was also outstanding in my opinion.

 

[406Rebel]

BA! How does it ride?!

You’re the first King install I’ve seen.

Good so far, haven’t really tested it out much as just finished the install yesterday and had alignment done today

 

[Grape_Ape]

Installed these bad boys today to replace the oem side dash speakers. WOW what a difference. I've got the alpine system already but damn these really set it off. Much clearer while maintaining all the bass. I love it.

 

[Shmannion13]

I didn’t actually physically do anything to it ....... but I put my order in for Borla s-type catback with black tips

 

[MayhemMOORE]

I have the same bike rack, but on my Cayenne. I am considering a tailgate pad for the truck....looking at the RaceFace T2 and Bachelor Pad models. Then I'd have two vehicles that can lug bikes around to separate locations so I don't always have to go where my son wants to ride.

I’ve been looking for a new pad since my original RaceFace doesn’t work for crap on the Ram tailgate. I loved it on the Titan and we used one in Korea on a buddy’s GMC all the time, so now it just hangs on the wall. I’ve been trying to find a pic or info on the Bachelor pad’s fitment on our tailgate, but so far no luck. If you end up getting one I’m interested to see how it fits.

 

[K_Hub]

Didn’t do anything but instead drove two hours with the wife to drive around Joshua Tree National Park and enjoy the sunset. Good to get out of the house!

Sent from my iPhone using Tapatalk

 

[RamConvert82]

Looks really good. I've got the wheels on my Mazda 3 dipped as well. They need to be redone but they've held up really well over the past 4/5 yrs that I've had it done. The only real peeling they've sustained has been due to tire rotations and changes from discount tire.

Did you spray the lugs? I'm debating that and curious how the dip would hold up with tire rotations. I could spray the wheels off the truck but then my lugs wouldn't match. I don't intend to re-dip every 6 months to repair so trying to see what my options are.

Thanks

Sent from my SM-G955U using Tapatalk

 

[Grape_Ape]

Did you spray the lugs? I'm debating that and curious how the dip would hold up with tire rotations. I could spray the wheels off the truck but then my lugs wouldn't match. I don't intend to re-dip every 6 months to repair so trying to see what my options are.

Thanks

Sent from my SM-G955U using Tapatalk

Nah, I left the lugs untouched. May be why that part of it the dip lasted so long. I liked the look of black wheels with silver lugs.

 

[Waterfowler41]

Not so much what i did to my Ram but what I put in my Ram. Picked up a Tamarack Pro last night. Ready to hit the lake this weekend! Be safe everyone!

 

[K_Hub]

Not so much what i did to my Ram but what I put in my Ram. Picked up a Tamarack Pro last night. Ready to hit the lake this weekend! Be safe everyone!

Nice! I’ve got my eye on a Hobie Passport. I used my buddy’s Hobie with the pedal drive and now I must have one.

Be sure to post pictures of the fish! Enjoy.


Sent from my iPhone using Tapatalk

 

[T_etzz]

New wheels came in, mount and balance next week.

 

[5thGenRebel_AMK]

didn't do any modifications, but finally took my first exhaust video of the truck from the outside yesterday. had this exhaust for a few months now and am finally hearing what it sounds like on the outside

 

[Le_Slacker]

Not so much what i did to my Ram but what I put in my Ram. Picked up a Tamarack Pro last night. Ready to hit the lake this weekend! Be safe everyone!

How long is that thing?
Wife has a kayak on order that I think she said is 12 feet and trying to visualize how much sticking out I will have