What did you do to your Ram today???

[bigoldthor]

Today, the dealer is installing the OEM step tubes and applying the Simonize treatment. Will post pics once it's done and I have time.

 

[Livinfast85]

Just added the Chrome Grille Overlay today...
And a few days ago added some ambient lighting on the dash

Do you have a link for the lights you used for the ambient lighting?

 

[rzims]

Can’t wait to install these tomorrow!

Ok, probably a dumb question, I apologize in advance......what is the purpose of airbags? I've seen them on HD trucks for towing, but don't know why they are installed on a half ton? Is it for towing or just raising the truck?

 

[MannymanX]

Do you have a link for the lights you used for the ambient lighting?

Yes sir!

Amazon.com: Car Interior Light Strip, 12V Neon Atmosphere Glowing Strobing Electroluminescent Light Glowing EL Wire Cable for Car Door/Console/Seat/Dash Board Decoration (3M Blue): Automotive

Amazon.com: Car Interior Light Strip, 12V Neon Atmosphere Glowing Strobing Electroluminescent Light Glowing EL Wire Cable for Car Door/Console/Seat/Dash Board Decoration (3M Blue): Automotive

www.amazon.com

 

[Livinfast85]

Ok, probably a dumb question, I apologize in advance......what is the purpose of airbags? I've seen them on HD trucks for towing, but don't know why they are installed on a half ton? Is it for towing or just raising the truck?

They are for towing. I have them on mine also.

 

[UNKALJ]

Tinted down getting ready for Ga heat. A mix of Coolvu and LLumar

Love the white night edition. I was torn between the white and silver, I ended up going with the silver.

 

[Rustin5]

Got this in. Dog approved

 

[SColang22]

Ok, probably a dumb question, I apologize in advance......what is the purpose of airbags? I've seen them on HD trucks for towing, but don't know why they are installed on a half ton? Is it for towing or just raising the truck?

Towing. Our trucks squat a lot. Airbags is a terrible way to raise the truck without a load lol

 

[Waterfowler41]

My big “muff” showed up on Valentine’s Day! I laughed. Video coming soon! As much as I wanted the race muffler, my practical side said go with the street muffler.

 

[Diamondback]

Was given an AMPPRO AP4-CH41 to test my 6th Order box from a previous vehicle. So, if the weather holds out this weekend, I'll install and take to work Monday to show that AudioBuffs.

 

[bigoldthor]

Today, the dealer is installing the OEM step tubes and applying the Simonize treatment. Will post pics once it's done and I have time.

Here we go:

 

[All_Black_Lone_Star]

Not what I did but what I had. Several things for the Ram audio, will be putting them up for sale. Decided after all I’ve done to it, I’m just going to enjoy as is after it comes back from being lifted.

Keep us posted on what’s for sale.

 

[SColang22]

Installed the timber grove airbags today. Took 57 minutes. I cannot say enough about these. Easy install. No cutting. Running them at 10psi unloaded. Had them up to 100psi leak checking with no issues. If you are looking at airbags check timber grove.

Air Suspensions, Air Compressors, Air Springs for Trucks in Jim Falls WI | Timber Grove Enterprises, LLC

Air Suspension, Air Springs & Air Compressors for Factory, Lowered or Lifted Trucks

timbergroveenterprises.com

 

[renzo2213]

I installed the RC 2” front leveling struts. Before install my truck measured 35.5” from ground to fender, after install 39.25” and 39.5”. Hopefully it settles quick because I hate the squat lol the rear is at 38.5”

Before:

After:

Sent from my iPhone using Tapatalk

 

[BiGJZ74]

Installed the timber grove airbags today. Took 57 minutes. I cannot say enough about these. Easy install. No cutting. Running them at 10psi unloaded. Had them up to 100psi leak checking with no issues. If you are looking at airbags check timber grove.

Air Suspensions, Air Compressors, Air Springs for Trucks in Jim Falls WI | Timber Grove Enterprises, LLC

Air Suspension, Air Springs & Air Compressors for Factory, Lowered or Lifted Trucks

timbergroveenterprises.com

Noticed that you used 1/4" spacers on ur 3.5" lift. Can I see a pic of ur truck?

 

[SColang22]

Noticed that you used 1/4" spacers on ur 3.5" lift. Can I see a pic of ur truck?

1/4” spacer on the wheel to fit the 35/12.5’s so I didn’t rub the UCAs

 

[MannymanX]

1/4” spacer on the wheel to fit the 35/12.5’s so I didn’t rub the UCAs View attachment 46782

How is the ride?

 

[SColang22]

How is the ride?

Rides fine. A little worse than stock but that’s expected from a lift and off-road tires

 

[MannymanX]

Rides fine. A little worse than stock but that’s expected from a lift and off-road tires

Thank you for sharing!

 

[renzo2213]

Rides fine. A little worse than stock but that’s expected from a lift and off-road tires

Add the RC 2” level strut and only put the top hat on it, not the spring loader. Your ride will be much smoother. I just installed the 2” level strut from RC and it’s a night and day difference from the stock struts, it glides ride over bumps


Sent from my iPhone using Tapatalk