6” RC Lift with 20x12 with 35’s clearance

[BlackKnightRam]

Anyone have the 6” Rough Country Lift with 20x12’s wrapped with 35’s? If so what clearance do you have since I had issues with 33’s on the 3.5” RC Lift

 

[TruckFoo]

I have a 6" RC lift with 22 x 10 wheels, 35" tires, -25 offset and some minor plastic trimming.

 

[Dontfront82]

Anyone have the 6” Rough Country Lift with 20x12’s wrapped with 35’s? If so what clearance do you have since I had issues with 33’s on the 3.5” RC Lift

What was your offset on the wheels with the 3.5 lift?
And what issues u have?

 

[BlackKnightRam]

What was your offset on the wheels with the 3.5 lift?
And what issues u have?

They are 20x12 -44 offset had rubbing on the front door sides of the wheel well

 

[19Jake]

38's no issues

 

[Dontfront82]

38's no issues
View attachment 24676

Looks great! What lift?

 

[ksn240]

Looks great! What lift?

That belonged to a member here. @Vettethret I believe. He was wanting to do CSTs 6.5” kit if I remember correctly but it kept getting delayed. Not sure what he ended up going with.

 

[ObviousFU]

35x1250x20 stock wheels with 1.5" wheel spacers, minor rubbing on inner fender at full lock. Not enough to worry about trimming.

Sent from my SM-G960U using Tapatalk

 

[pber1]

Fabtech 6in. 20x10 -19 on 35x12.5 minor trimming was needed.

 

[BiGJZ74]

Fabtech 6in. 20x10 -19 on 35x12.5 minor trimming was needed.
View attachment 24748

Do the rear shocks have the resivoirs on this fabtech kit? Do you have anymore pics? Side shot please?

 

[pber1]

Do the rear shocks have the resivoirs on this fabtech kit? Do you have anymore pics? Side shot please?

They don’t. I thought they came with the reservoirs but I guess they’re not included! Took this yesterday but it was loaded with 1,500lbs of bagged feed. Give me a few minutes and I’ll take some side shots

 

[pber1]

@BiGJZ74 that’s the best I could do right now.

 

[EricJRegan]

5”RC 37’s. Minor trimming but otherwise fine

 

[Dontfront82]

5”RC 37’s. Minor trimming but otherwise fine View attachment 24909
View attachment 24907 View attachment 24908 View attachment 24910

When did r.c come out with at 5 inch kift?

 

[ksn240]

When did r.c come out with at 5 inch kift?

The kit for air ride models is 5" instead of 6"

 

[Dontfront82]

The kit for air ride models is 5" instead of 6"

Ahh correct

 

[sgk]

5”RC 37’s. Minor trimming but otherwise fine View attachment 24909
View attachment 24907 View attachment 24908 View attachment 24910

Sure looks nice, now you can go painting in the most rural of areas. I'd call just to get a closeup.

 

[RamSco]

Anyone have the 6” Rough Country Lift with 20x12’s wrapped with 35’s? If so what clearance do you have since I had issues with 33’s on the 3.5” RC Lift

6" BDS with 35's on 18 x 9 zero offset zero trimming. Lot's of guys prefer more tire outside the fender well which I understand but I like less snow and mud slinging.

 

[bgmshrm]

Looks great! What lift?

he doesn't know not his truck . according to the owner major rubbing.

 

[pber1]

6" BDS with 35's on 18 x 9 zero offset zero trimming. Lot's of guys prefer more tire outside the fender well which I understand but I like less snow and mud slinging. View attachment 26452

Do you have any pics of your truck on a level surface? Curious to see if the BDS kit has any rake. My Fabtech kit sits about an inch higher in the back and it bugs the shït out of me so I wanna see if the rear BDS coil makes a huge difference.